The versatile Noodlehead Lawn & Garden Sprinkler includes one spike, two plugs, and two filter washers! It connects to either an in-ground system or to a standard garden hose.  For more information on this product, take a look at our Product Features page.

If you need to water above growing vegetation, take a look at the Extend-A-Riser Optional Accessory Base.

* Each Extend-a-Riser will adjust to three different heights; 8″, 16″ and 24″
* Allows greater control and stability.
* Adapts as your garden grows on its own riser 8″ to 16″ to 24″
* Elevates the Noodlehead above obstructions or vegetation.
* Attaches to a standard garden hose.
* Gives the hose-end market the option of creating their very own “above-the-ground’ sprinkler system, complete with risers.
* Simply adjust the Extend-a-Riser as your garden grows for the most efficient watering.

Install the riser volume control valve in between your Noodlehead Lawn & Garden Sprinkler and your existing in-ground irrigation system risers to quickly, easily, and cost effectively control the water volume delivered to you Noodlehead.

The hose volume control valve is for hose-end applications. It easily attaches directly to the Noodlehead Lawn & Garden Sprinkler to control water volume right at the source!

The “Y” coupler for hose-end applications allows you to install 2, 3, or more Noodleheads on a single line, from your hose, bib, or faucet.

The “Y” coupler is for hose-end applications and allows you to install 2, 3, or more Noodleheads on a single line, from your hose, bib, or faucet while allowing for water volume control of each individual Noodlehead.

The hose mending kit (male) can be used to create your own dedicated, above-the-ground sprinkler system by cutting and splicing your existing hose into whatever lengths you may need.

The hose mending kit (female) can be used to create your own dedicated, above-the-ground sprinkler system by cutting and splicing your existing hose to whatever lengths you may need.

(roll of teflon tape)

The spike stabilizes your Noodlehead Sprinkler in the ground.  It can be used with the Extend-A-Riser also.  This item is included with the Noodlehead Sprinkler!

Hint: If you have especially hard or rocky soil, use a screwdriver to create a small hole for the spike and then firmly press the spike into the ground.  If you are using the spike with the Extend-A-Riser, avoid pressing on the four legs that provide stabilization as they may break under large amounts of pressure!

This kit includes 1 large plug for a garden hose inlet and 1 small plug for a pipe inlet as replacements, should you lose the set included with your original Noodlehead Lawn & Garden Sprinkler.

This kit includes two fine mesh stainless steel filter washers, 1 large and 1 small, to replace the set included with your original Noodlehead Lawn & Garden Sprinkler should they become lost or damaged.

This set can be used with additional risers to further elevate the Noodlehead Lawn & Garden Sprinkler should this be required to effectively water your growing garden!

This set can be used with additional couplers to further elevate the Noodlehead Lawn & Garden Sprinkler should this be required to effectively water your growing garden!